Archive for May, 2011

How to configure (set up) an Apple Time Capsule to a AT&T 2Wire (2701HG-B) modem/router

Posted in Off-Topic on May 12, 2011 by The Center Shot

I know that this has NOTHING to do with politics, economics, social issues or any other subject I normally talk about; but I had SO much trouble getting my Apple Time Capsule to work with my AT&T 2Wire 2701HG-B router/modem, that I wanted to post how to do it. When I tried to find instructions online, I couldn’t find any and it took me HOURS of time on the phone with AT&T tech support and Apple Tech support to get it done! Neither company was much help until I raised enough ‘cain’ to get the attention of a supervisor- both companies’ tech support departments tried to ‘pass the buck’ to the other company and that didn’t get me anywhere.

I’ll bet there are some other pretty frustrated AT&T DSL customers out their, like me, that were all excited to get their Time Capsule’s up and running; only to get home and find out that they ‘bit off’ more than they anticipated! So, I thought I’d post how we did it in layman’s terms – from one layman to another! This is the part of the configuration process that Apple won’t help you with because they don’t offer “3rd party” support. Since I’m not a “techie” I can’t guarantee this will work for you, and I’m not responsible if it doesn’t, but this is what worked for me – I hope it’ll help you!

Before we get started, though, I want to let you know that the EASIEST way to set up your Time Capsule, if you have a AT&T 2Wire 2701HG-B modem/wireless router is to GET RID OF THE 2Wire unit!  You can buy a AT&T compatible stand-alone DSL modem that’s basically a plug & play solution without having to go through all these steps!  But, if you’re like me, I don’t want to spend the money if I don’t have to!  So, I went through the trouble to get this all figured out.  Plus, I live 1.5 hours from the nearest “Best Buy” and I wanted my internet working TODAY! The decision is yours to make.

OK, here goes…

First of all, you need to understand that in order to connect your Time Capsule to AT&T’s (pain-in-the-rear) 2Wire 2701HG-B router/modem combo, you must disable both the “wireless” and the “router” functions within the 2Wire unit. Apparently, you can’t have two wireless routers connected because they ‘fight’ with each other over connecting to the internet- a battle which neither will win unless you disable one. The Apple Time Capsule is a FAR better wireless router than the 2Wire, so if one of the two has to go, it should be the 2Wire!

Before you make these changes to your router, you will need to call AT&T and get your “Network Password” from them and make sure you know your network username – it’s usually the default email address that AT&T gave you for free when you originally set up your account- something like, “” If they give you ANY flack about getting your “Network Password,” tell them that you are disabling both the router and the wireless functions in your 2Wire 2701HG-B and that you will need the AT&T Network Password to configure your Time Capsule!  Your Network Password is usually 3 letters followed by 3 numbers and it’s set by AT&T, not you!  Knowing this will make you sound like you know what you are doing, LOL!

Also, as a note, I already had my computer (MacBook Pro) configured with my Time Capsule to the extent that my computer could ‘see’ the Time Capsule already- I just couldn’t connect to the internet because the 2Wire wouldn’t let the internet pass through to the Time Capsule. These instructions are how to resolve this conflict between the 2Wire 2701HG-B and the Apple Time Capsule.  Even though I had this finished before I resolved this conflict, you can follow the instructions below first, and then walk through the Time Capsule wizard/instructions to set it up. However, IF you choose to do this, you will still need to go into the Time Capsule’s “Manual Setup” to make the appropriate setting changes listed in steps 8 – 10 below.  Either way leads you to the same thing – internet access and joy at owning the best wireless router and backup drive on the market – the Apple Time Capsule!

Here goes…..

Step 1. Log into your 2Wire router by connecting an “ethernet” cable from one of the 4 ports (hint: don’t use the port furthest from the phone line jack) on the back the 2Wire 27101HG-B router to the ethernet port on your computer. Then check to make sure you can connect to the internet using this “wired” connection to the router. You will probably need to disable the wireless feature on your computer so that it’s using the ethernet connection to connect to the 2Wire modem/router and the internet.  To do this on a Mac, you can go to Airport icon at the top right of your screen, click on it and select “Turn Airport Off.” If you can access the intenet, then open up a browser window and enter the following digital address into your browser’s address bar: and hit “enter” on the keyboard. This should bring up the “splash page” (also called the control panel) for the router.Note: you may need to enter a password to actually access this page- this is NOT the same password as your “Network Password” – it’s one you set up when you originally got your 2Wire modem/router! If you don’t remember it, call AT&T tech support and get them to help you reset your modem so that you can create a new password and re-set-up the modem – it’s not hard.

Step 2. Click on the “Home Network” icon at the top of the page – it’s the 3rd image to the left of the AT&T logo!

Step 3. Once the “Home Network” page loads, look at the “Status At A Glance” box on the right hand side of the page and, below that it says, “Home Network” in red. Below this you’ll see the word “Wireless” and a button to the right of “Wireless” that says “Disable”. Note: in the screen shot to the right, you’ll see a button for “Enable” because I’ve already disabled the wireless function on my router. If YOU see the button for “Disable,” CLICK IT!  Once you do, you should see the “Enable” button appear (like in my screen shot) and that’s what you want – the 2Wire is no longer sending out a wireless signal!

Step 4. Next, type he following address into your browser’s address bar: and hit the ‘enter’ key.  This will bring up the “Management and Diagnostic Control” page. *See screen shot to the right* You will most likely need to re-enter your 2Wire password – again, not the same one as your “Network Password!”

Step 5. Click on the “Configure” link on the left-hand side of the page – it’s the last link under the heading, “Broadband Link” near the top of the list. The configure page should load and look like this:

Step 6. You now need to change some of these settings. You can see the proper settings in the screen shot below, but here’s a list

  • VPI: Should be set at 0 (if it isn’t already!)
  • VCI: Should be 35
  • ATM Encapsulation: should be “Bridged LLC
  • ATM PVC Search: should be “Disabled
  • Broadband Connection: should be “Enabled
  • Connection Type: should be “Direct IP (DHCP or Static)”
  • Type in your username, and “Network Password” (that you should have gotten from AT&T before you started!) and confirm the password.  This is the first of 2 times you will need this “Network Password” in the process of setting up your Time Capsule with a 2Wire 2701HG-B router/modem.
  • The rest of the settings on the page should be left alone – let them stay as they are by default.
Scroll down and click  SUBMIT or ‘save settings’ – or whatever the button says (I forget the exact wording) to make the changes you made take effect.

Step 7. Now navigate your way to the “Configure Services” page – look near the bottom of the list on the left hand side of the Management & Diagnostics Console pages you’ve been on for the last couple of steps.  It’s under the heading (in black type) of “Advanced.”  Click this link and wait until the page opens.  Once the page opens, you should see a page that looks like the screenshot to the right and has a heading (in bold black type), “Advanced – Configure Services” and (most likely) there will be a blue ‘check’ mark in the “Enable Routing” box – I circled the box in neon green in the screenshot. This box needs to be UN-checked – in other words, there should NOT be a check in the box!  If there is a check in the box, then your 2Wire will work as a router and we DON’T want that!  Once the box is unchecked (empty, like in the screenshot) click “Submit.”

NOTE:  At this point, if you look at the lights on your 2Wire modem, you should see that the “wireless” light and the “internet” light have gone out.  Don’t worry – this is what you want!  it means that your 2Wire 2701HG-B is now functioning in “bridged” mode and is basically nothing more than a DSL modem. Period.  It’s no longer a wireless router – unless you decide to press the rest button on the back to return it to its default settings!

Step 8. Make sure that your Time Capsule is connected to your 2Wire with a ethernet cable running from the 4th ethernet port (the one furthest from the phone/DSL line port/connection) to the WAN port on the back of the Time Capsule.  It was recommended to me that the 4th port on the 2Wire unit works better- for some mysterious reason!

Note: At this point, you are likely to have a blinking yellow light on the front of your Time Capsule. This means that the Time Capsule still cant reach the internet.  But not to worry- that’s soon to change to green!

Step 9. Turn your wireless capability on your computer back on – On a Mac, that means going to the  “airport” icon at the top right of your screen and select “turn airport on” from the drop-down menu. Then, open your Airport Utility: go to “Spotlight” (the little magnifying glass in the top right corner of your computer screen) and type “airport” and click on “Airport Utility.” 

Step 10. Once the Airport Utility application opens up, click the “Internet” icon at the top of the page (see screen shot below – I circled the “internet icon” in neon green) and make sure that the “Internet Connection” tab is selected or, in other words, is highlighted in blue. Then make the following changes:

  • Connect Using: PPPoE – from the drop-down menu
  • Account Name: Enter your AT&T username (discussed earlier)
  • Password: Enter your AT&T “Network Password” (discussed earlier)
  • Verify Password: Re-enter your AT&T “Network Password”
  • Click “Apply!”
If the light on the front of your Time Capsule is green now, you are ready to go – try an internet search!  If it ISN’T green yet, disconnect the power to your 2Wire modem, the Time Capsule and shut down your computer. Then:
  1. Reconnect the power supply to the 2 Wire modem and wait until it has a chance to fully start up. 2-3 minutes.
  2. Then reconnect the power to your Apple Time Capsule and wait until the light turns green on the front of the unit.
  3. Re-start your computer and, if you followed these instructions, you should be able to surf the internet!  Enjoy!
I hope these instructions help someone! I tried to make them as dummy-proof because that’s what I need!  I’m no computer expert and I don’t really understand what all this means, but I know it worked and I’m posting this through my Apple Time Capsule, my 2Wire 2701HG-B and my AT&T DSL line!
If nothing else, these instructions will give you what you need to demand help from an Apple or AT&T tech support person- if you spend enough time with either department on the phone, you WILL find someone that can help you with this.  I just hope this helps YOU avoid those hours I spent on the phone to get these steps figured out!
Now, back to our regularly-scheduled socio-political commentary!  Please excuse this diversion.

Pakistan has a lot of explaining to do!

Posted in Uncategorized with tags , , , , , , , , , , , , , , , , , , , on May 2, 2011 by The Center Shot

As joyous an occasion as today is, with the news that Usama Bin-Laden has been killed in Pakistan by US Special Operations Command operatives, it is very disturbing that Bin-Laden has been hiding under the nose of the Pakistan military! Abbottabad is the home and headquarters of Pakistan’s 2nd Division of the Northern Army Corps- one of the biggest divisions in the Pakistani Army; and is located only 38 miles from Islamabad, the capital of Pakistan.

For years we have been led to believe, largely by the Pakistani military and Pakistani Inter-Service Intelligence (ISI), that Bin-Laden was hiding in an isolated region in the mountains of Afghanistan and Pakistan, probably in a cave. As it turns out, he had been living in a large custom-built (5 years ago) compound with 18 foot high walls topped with barbed wire, designed to protect a high-value target like Usama Bin-Laden.Even the White House has described the compound as a “unique structure that does not match any of the homes in the area.” There is no conceivable way that his presence in Abbottabad was NOT known by members of the Pakistani Military and the Pakistani ISI.

The fact that President Obama and the US Special Operations Command initiated the operation to capture or kill Bin-Laden from Afghanistan and without any notification to the Pakistani government, makes it clear that the US government realizes that we can not trust the Pakistani government and their military; and that there was a serious risk that, had they notified Pakistan of the operation, Bin-Laden would have been tipped off and, likely, been able to escape! How many years ago might we have been able to capture or kill this monster, had our “partners” in Pakistan not been helping Bin-Laden to hide?

These facts call into serious question, the billions of dollars in funding that we have given Pakistan over the past 10 years because of their supposed assistance in the “war on terror.” Why have we been funding a country and a military that is not truly our ally? I don’t mean to imply that the entire Pakistani government has been working against our efforts; but it’s clear that Bin-Laden has enjoyed the protection of the Pakistan at some of the highest levels of their government, military and intelligence apparatus. Without such help, there is no way he would have been able to hide in such plain sight.

Even if those people who aided Bin-Laden comprise a small faction within the Pakistani government, it is unacceptable; and there is no way that this double-cross was not known (or at least suspected) within the rest of the Pakistani government. These fears have been expressed by many people here in the US for years but have always been down-played by the US government (at least publicly) in order to maintain whatever “assistance” we could get from Pakistan. Now the question must be asked: at what cost and to what end? In the end, the killing of Usama Bin-Laden was, primarily, the result of US intelligence with very little assistance from Pakistan and there is good reason to suspect that many US lives and billions of taxpayer dollars have been wasted chasing fairy tales and lies cooked up by elements within the Pakistani government!

Once the celebration over the death of Usama Bin-Laden is finished, there need to be some hard questions asked of Pakistan and some real answers need to be required. Congress should launch a serious and detailed investigation into Pakistan and determine whether we have wasted our lives and money supporting the Pakistani government. If the evidence shows that Pakistan has been accepting US assistance and, at the same time, shielding Bin-Laden, they MUST be held to task for this double-cross. There is no sense in continuing our relationship with Pakistan, as it currently exists, if they are not truly united in their desire to eliminate terrorism and to stop their country from being used as a haven for terrorists.

We have long been told, and we’ve hung to the belief, that “most” Pakistani’s want ‘freedom’ and ‘democracy’ and that they disavow radical Islam. Unfortunately, as we watch the reaction to Bin-Laden’s death in Pakistan, the protests on the street paint a very different picture. Even if it’s not a majority of Pakistani’s citizens sympathizing with, or openly supporting radical Islam, it’s certainly too many of them. Considering the $18.6 billion we’ve shelled out to Pakistan ($3 billion more last year!), I don’t think it’s unreasonable to expect a majority of the Pakistan population to be both grateful and supportive of the US effort. If they’re not so inclined, I think it’s time we formulate another approach to dealing with Pakistan.

This is, apparently, what $18.6 billion taxpayer money buys us!

Pakistani's protest killing of Usama Bin-Laden

Pakistan has been ‘milking’ the American taxpayer for too long. It’s time that we put some actual strings onto any future support that we give Pakistan and that we require solid and concrete positive results for our money. At a time when we are dealing with a financial crisis unlike anything since the Great Depression at home, we simply aren’t in a position to throw good money after bad and support a country that seems to support our enemy at least as much as they support us. What is wrong with demanding results and imposing performance-based aid packages. Let Pakistan earn our gifts instead of giving them away and hoping that we get something worthwhile in return.

Usama Bin-Laden Dead – Thanks to our Special Operations Command and Intelligence Community!

Posted in Uncategorized with tags , , , , , , , , , , , on May 2, 2011 by The Center Shot

I want to send out a personal “Thank You & God Bless You” to our Special Operations Command and it’s brave operators; as well as to the entire intelligence community for their tireless, and often thankless, efforts to locate and eliminate this scourge! Job well done! I wish that we could thank the team members directly but I doubt we will know their names for a long time, if ever- understandably. If anyone want’s to thank them, one great way to do that is to donate to the Special Operations Warrior Foundation.